Dongguan Jinbang Advertising Co

Banners are long pieces of vertical writing. The size is generally one piece of rice paper cut into half. When arranging the composition, you should be able to carefully conceive according to the characteristics of the book style and have a new idea. When creating, pay attention to the primary and secondary relationship between the text and the signature. The signature should be well-proportioned, natural and vivid. The signature can be written below the last line of text, and there should be room for layout. The bottom of the paragraph is generally not flush with the main text to avoid rigidity in form. You can also occupy another line or two lines after the main text. The top and bottom should not be flush with the main text. The seal should be smaller than the inscription, and the seal usually needs to be placed at least one character away from the inscription. It can also be stamped to the left of the inscription. Banners also include advertising banners, which are banners that are pulled high or posted on the wall, which can play the role of advertising and publicity.
The manual engraving method uses a cutting plotter or hand-drawing (requires art skills) to write the pictures and texts on white paper. Use a utility knife to dig out the parts that need to be printed (the connecting parts need to be left) to prepare the printing material. If it is dark Use glue for colored cloth and water slurry for light-colored cloth (special fabrics such as nylon have fastness requirements, and inks can be used). Prepare the screen frame and stretch the mesh screen (polyester mesh is taught well). Prepare the printing material (cloth) and engrave it. Place the good words on the fabric, press the blank screen, pour the printing material into the squeegee, fill it up and dry the printing material, tear off the printed paper, and so on.
Photosensitive plate making method If the quantity is large and the content is the same, you can use this method. Coat the photosensitive glue on the prepared screen and use a flying film or computer-engraved timely sticker to paste it on the well-glued screen. Use a projection-type drying lamp to dry the board (usually the screen frame is about 1 meter), wash, develop and print with water.
In the self-adhesive method, a computer-engraved sticker is applied to the screen board and used directly for printing. The key thing to note is that the viscosity of the sticker is not easy to use. You can use a hair dryer to heat it and then press it tightly or Add some glue to the strokes, etc.
Thermal transfer printing method is now a popular production method in many places in China. It has the characteristics of good hand feeling, good fastness, no need for drying, no pollution, etc., but the cost is slightly higher. Use silk screen or offset printing colored paper (or The ready-made monochrome paper is carved and collaged) and placed on the printing cloth. After being pressed at a high temperature for a few seconds, the image and text are firmly printed on the cloth and become a banner.